A tornado warning, a tsunami warning, and an earthquake don’t give you the same amount of notice. One might buy you fifteen minutes. Another might buy you fifteen seconds. The alert systems built to warn you are just as different — and most households only have one of them turned on, which means they’re only covered for one kind of emergency.
There are four separate warning systems worth knowing in the Pacific Northwest: Wireless Emergency Alerts, NOAA Weather Radio, your county’s opt-in alert system, and ShakeAlert earthquake early warning. None of them replaces the others. Here’s what each one actually does, and how to confirm yours are working before you need them.
Wireless Emergency Alerts (WEA): The One That’s Already On
Wireless Emergency Alerts are the loud, buzzing messages that show up on your phone’s lock screen for tornado warnings, tsunami warnings, AMBER Alerts, and other imminent-threat events. They work differently than a text message: WEA uses cell broadcast technology, which pushes the alert to every WEA-capable phone in a geographic area simultaneously, rather than routing it to your specific number. That’s why WEA can still reach you even when cell networks are jammed with call and text traffic during a disaster.
How to confirm it’s on: On iPhone, check Settings → Notifications → scroll to the bottom for Government Alerts. On Android, check Settings → Safety & Emergency → Wireless Emergency Alerts. Every modern phone has these on by default — the only alerts you can typically toggle off are AMBER Alerts and non-life-threatening advisories. Leave the imminent-threat and public-safety categories on.
The catch: WEA depends on your phone having a live cell signal. If a cell tower loses power and its backup battery runs out — which the FCC requires to last 4 to 8 hours, not indefinitely — WEA stops reaching you exactly when a prolonged outage makes you need it most.
NOAA Weather Radio: The One That Doesn’t Need Cell Service at All
NOAA Weather Radio All Hazards is a nationwide network of over 1,000 transmitters broadcasting continuously on seven dedicated VHF frequencies. It requires no cell signal, no internet, and no subscription — just a receiver. It’s also not limited to weather: the “All Hazards” name is literal, covering AMBER Alerts, chemical releases, earthquakes, tsunamis, and other public safety events through the same broadcast backbone as the national Emergency Alert System.
How to confirm you’re covered: You need an actual NOAA Weather Radio receiver — a phone is not a substitute here. Look for a model with SAME (Specific Area Message Encoding) support, which lets you program in your county’s code so the radio only sounds for alerts relevant to your area instead of every warning across a multi-county broadcast zone. Battery or hand-crank models remove the last dependency: power.
Why it matters most in a major quake: In a Cascadia Subduction Zone event, cell towers and electrical power are both expected to fail across a wide area. A charged or hand-crank NOAA radio becomes one of the only ways to receive official information in the hours and days that follow — see our power outage preparedness guide for how to keep it running.
County-Level Opt-In Alerts: The One You Actually Have to Sign Up For
This is the system most households skip — and it’s the one that carries the most locally specific, actionable information: evacuation orders, shelter openings, boil-water notices, road closures. Oregon and Washington each run a statewide alert network (Oregon Notify and Alert Washington), but registration happens at the county level, and each county runs its own branded portal that feeds into the state system.
Unlike WEA, these systems require you to register in advance with your name and contact preferences — phone call, text, email, or push notification. Unlike NOAA Weather Radio, they can be genuinely two-way and hyper-local: your county emergency manager can target a message to a single neighborhood.
How to confirm you’re covered: Search “[your county] alert” or check your county’s emergency management page. Oregon examples include ClatsopALERTS, Jackson County Alert, and Lane County Alerts; Washington examples include Alert King County, Alert Washington’s Pierce County portal, and Snohomish County’s SnoCo Emergency alerts. Register every adult in the household separately where the system allows it, and register a work address too if you commute — alerts are typically geo-targeted to where you are, not just where you live.
ShakeAlert: The One Measured in Seconds, Not Minutes
Earthquakes don’t come with a forecast. ShakeAlert, the West Coast’s earthquake early warning system, works by detecting the faster-moving initial seismic waves from a quake already in progress and racing that detection to you ahead of the slower, more damaging shaking waves. Depending on your distance from the epicenter, that can mean a warning of anywhere from a few seconds to just over a minute — enough time to Drop, Cover, and Hold On, step away from a window, or for a train or elevator to automatically stop.
How to confirm you’re covered: ShakeAlert delivers through two channels. Android phones have ShakeAlert-powered earthquake alerts built directly into the operating system — no app required, though it’s worth confirming it’s enabled under Settings → Safety & Emergency. iPhone users need a third-party app, such as MyShake or QuakeAlertUSA, since Apple has not built ShakeAlert delivery into iOS directly. If you have an iPhone, this is the one alert system in this post that will not work unless you take an extra step today.
The catch: A few seconds isn’t enough time to evacuate a building or drive anywhere. It’s enough time to protect yourself where you are. Know what you’ll do with those seconds before you get the alert — see our earthquake home hardening guide for what “Drop, Cover, and Hold On” should look like in your specific rooms.
Why One Alert System Isn’t Enough
Look at what each system actually depends on: WEA needs a live cell tower. County alerts need you to have registered and need cell or internet service to deliver. ShakeAlert on iPhone needs an app you installed in advance. NOAA Weather Radio needs a device and, ideally, batteries. Every one of these has a failure point — and in a real Pacific Northwest disaster, the most likely failure points (cell towers, power, internet) tend to fail together, at the same time, in the same event.
That’s the actual argument for redundancy: not “more alerts are better” in the abstract, but that stacking systems with different failure points means a single point of failure — a dead cell tower, an un-updated phone setting — doesn’t leave your household blind. A phone alone covers you well right up until the moment it doesn’t.
Emergency Alert Readiness Checklist
- Confirm Government Alerts / Wireless Emergency Alerts are enabled on every phone in the household
- Own a battery or hand-crank NOAA Weather Radio with SAME county programming, and check the batteries twice a year
- Register every adult, and your work address if different from home, with your county’s opt-in alert system
- If anyone in the household has an iPhone, install MyShake or QuakeAlertUSA for ShakeAlert coverage
- Confirm Android earthquake alerts are enabled under Settings → Safety & Emergency
- Agree as a household on what each type of alert means you should do — see our family communications plan for building that into a written plan
None of these four systems is a substitute for the others — each one is built to warn you about something different, on a different timeline, over a different channel. Twenty minutes spent checking phone settings, registering with your county, and picking up a weather radio closes the gap between “the emergency happened” and “we knew in time to act.”
— Cascadia Ready Radio
“Be ready at home. Be ready to help.”
