In a significant earthquake, the danger inside your home comes not only from the shaking itself, but from everything in your home that isn’t attached to it. Bookshelves. Water heaters. Refrigerators. Flat-screen televisions. Cabinets full of dishes. These objects become projectiles, crush hazards, and secondary fire and flood sources the moment the ground starts moving.
Securing furniture and appliances is the most immediately actionable earthquake mitigation step most Pacific Northwest homeowners can take — and it’s one of the cheapest. A complete furniture anchoring project for a typical home costs under $200 in hardware and a few weekends of work.
Top Priorities: What to Secure First
Tall Furniture: Bookshelves, Wardrobes, Dressers, Filing Cabinets
Tall, top-heavy furniture is the most common cause of earthquake-related injuries inside homes. A six-foot bookshelf filled with books can weigh 200+ pounds and falls in the direction of its center of gravity — which in a shake becomes unpredictable. Any piece of furniture that could fall onto a sleeping area, a hallway, or a child’s bedroom is the first priority.
How to secure: L-brackets or furniture anchor straps bolted through the furniture and into a wall stud. The stud is critical — drywall anchors alone will not hold in a significant shake. Use a stud finder to locate studs, drill into them, and use bolts rated for the weight of the furniture. Furniture anchor strap kits (sold at hardware stores for $10–$25 per piece) include everything needed.
Water Heater
An unstrapped water heater that tips over in an earthquake becomes a gas line hazard, a water damage source, and — if the pilot light ignites a gas leak — a fire source. Water heater strapping is required by code in many Pacific Northwest jurisdictions for new installation, but older water heaters may have been installed before those requirements took effect.
Water heater strapping kits cost $15–$30 and use two metal bands around the tank bolted to the wall with lag screws into studs. Installation typically takes under an hour. If you are a renter, this is worth requesting your landlord address — it is a code compliance issue in many jurisdictions, not just a preference.
Refrigerator
A fallen refrigerator blocks evacuation routes, damages flooring, and — if it’s a gas-line refrigerator in older homes — creates a hazard. Anti-tip straps or a simple hook-and-eye arrangement to the wall behind the refrigerator prevents tipping. The refrigerator does not need to be immovable — it needs enough resistance to not tip fully over in a lateral shake.
Overhead Cabinets
Cabinet latches — specifically, child-safety style latches or earthquake-specific magnetic latches — keep cabinet doors from flying open and projecting their contents in a shake. This is particularly important in kitchens, where heavy dishes, glassware, and canned goods can become significant hazards. Earthquake latches cost $3–$8 per cabinet and install in minutes.
Televisions and Monitors
A wall-mounted television is already secure. A television on a stand is not. Anti-tip straps for TVs connect the back of the TV to the wall or to the furniture stand it sits on. These are inexpensive ($10–$20) and prevent the most predictable household injury from earthquake shaking.
Securing Your Hot Water Heater: A Step-by-Step
- Locate the wall studs behind the water heater using a stud finder
- Mark stud locations at the height indicated in your strapping kit instructions (typically upper and lower third of tank height)
- Drill pilot holes into the studs
- Attach wall brackets with lag screws (supplied in kit)
- Thread the metal bands around the tank and attach to the brackets, pulling them snug but not tight enough to dent the tank
- Verify the installation is rigid by gently pushing the tank — it should not have significant lateral play
What to Look For Above Your Sleeping Areas
Walk through your home and look at what’s overhead or adjacent to where your household sleeps and spends the most time. Heavy art frames hung on drywall anchors above a bed are a hazard. A heavy television across from the bed that isn’t secured is a hazard. Ceiling-hung light fixtures with heavy glass shades are a hazard. Relocate, secure, or remove these items before an event — not after.
Renters: What You Can Do
Many securing methods require drilling into walls, which some landlords restrict. Options that require no wall penetration:
- Non-slip furniture pads under furniture legs (slows but doesn’t prevent tipping)
- Removable adhesive museum wax for small objects on shelves
- Closed storage replacing open shelves where possible
- Requesting in writing that your landlord address water heater strapping (code compliance)
The total investment for a reasonably thorough furniture securing project — water heater straps, bookshelf brackets, cabinet latches, TV straps — is typically $100–$200 and one Saturday. It is one of the most concrete risk-reduction steps a Pacific Northwest household can take, and it’s done once.
Questions about specific furniture or appliance situations — older homes, unusual wall construction, apartment restrictions — drop them in the comments.
